Working in an industrial company exposes you to a lot of airborne microorganisms, fumes, vapours, and gases. That is why most industrial companies require their workers to wear a respirator. But to ensure that workers are using the right equipment, they carry out respirator fit testing Brisbane experts offer, so all workers are properly protected using well-fitted respirators.
Respiratory protective equipment (RPE) is any facial protective equipment designed to protect your airways from harmful contaminants in the air. This can be a respirator or a face mask that you are tasked to wear during operations. But, a fit test must be performed before you can wear your mask or respirator to ensure the right fit.
Types of respirator fit testing
There are actually two types of respirator fit testing Brisbane industries carry out these days. These are the following:
- Qualitative fit test (QLFT)
If you are using air purifying respirators for negative pressure, then a qualitative fit test is required. This is also done if you will be exposed to the potential hazard that is 10 times the permissible exposure limit (PEL).
To ensure that you are fairly tested, the following exercises are performed for one minute each. They are as follows:
– normal breathing
– deep breathing
– moving your head from side to side
– moving your head up and down
– bending over or jogging on the spot
– back to normal breathing
Just like other tests, there is also a “Pass” or “Fail” result, depending on your senses or reactions to the test agents used. If you can detect any of the agents used, then it means the respirator is non-compliant with the Control of Substances Hazardous to Health Regulations. Check it out at Resile
- Quantitative fit test (QNFT)
This test is the more common of the two and is used to check if your respirator is tight-fitting or if there is a leak on the face seal. The test result is based on the “fit factor” and uses the same 7-step exercises in the QLFT. But a ‘grimace test’ is added to the test if the facial seal is intact. This is done by smiling or frowning for 15 seconds.
Importance of respirator fit testing Brisbane companies offer
Respiratory fit testing is important especially if you work in an industrial company where you will be exposed to hazardous particles, vapours, or fibres. Wearing respirators ensures that your health stays in great shape. Make sure to choose a company that offers respiratory testing as part of their wellness assessment for workers.
Industrial companies are required to perform respirator fit testing as part of workers’ occupational health assessments. This is to verify that workers will be protected properly and feel comfortable while using the respirator. Companies, like Resile, have a specialised team that performs respiratory fit testing for workers. Check if your company is using a similar health assessment. If not, visit resile.com.au to use their services.
Respirator testing is sometimes challenging, and there are times when you need to do a retest due to failed results. That is why when dealing with occupational health and safety, always trust occupational health consultancy experts to ensure best results.